{"product_id":"universal-bms-canflex-canbus-e85-analyzer-eca","title":"Universal BMS CANflex CANbus E85 Analyzer (ECA)","description":"\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eItem Description:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eThis universal E85 analyzer plugs directly into your Flex Fuel sensor \u003c\/span\u003e\u003cspan\u003e(sensor kit sold separately) and outputs your ethanol reading on CANbus \u003c\/span\u003e\u003cspan\u003eallowing your flash only DME and\/or JB4 to read the ethanol signal. \u003c\/span\u003e\u003cspan\u003eIn addition it includes a harness plug for an optional low fuel pressure sensor \u003c\/span\u003e\u003cspan\u003e(available from Fuel-It!) adding this critical tuning \u003c\/span\u003e\u003cspan\u003einformation to platforms like the B58 that don't include a factory low fuel \u003c\/span\u003e\u003cspan\u003epressure sensor.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eCANflex now includes a LED readout! Route the new display box inside the cabin or glove box for a quick glance of your ethanol mixture or leave it in the engine bay under a plastic cover as a backup plan. Note the LED display is not water-proof and care should be taken to ensure it doesn't get soaked!\u003cbr\u003e\u003cbr\u003eCANflex also includes a 5V output for legacy integration to JB4 or flash maps that don't yet accommodate CANbus ethanol input.\u003cbr\u003e\u003cbr\u003eLow fuel pressure monitoring is critical for any vehicle running higher power levels and especially those with port injection. Our optional 10 bar low fuel pressure sensor kit includes a sensor and 1\/8\" NPT angle tee for easy fitment. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eCan be used with both rear mount and front mount sensor kits. Universal CANbus \u003c\/span\u003e\u003cspan\u003econnections are attached using removable posi-taps based on mounting \u003c\/span\u003e\u003cspan\u003elocation. See wiring guide below.\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWiring Guide for universal harness\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eRed (\u003c\/strong\u003e\u003c\/span\u003eoriginally Red\/Green\u003cspan\u003e\u003cstrong\u003e)\u003c\/strong\u003e: 12v switched power via fuse tap or posi-tap\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eBlack\u003c\/strong\u003e: Ground\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eBrown\u003c\/strong\u003e\u003cstrong\u003e (\u003c\/strong\u003e\u003c\/span\u003eoriginally Orange\u003cspan\u003e\u003cstrong\u003e)\u003c\/strong\u003e: CAN- (For front mount usually the factory yellow CANbus wire)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eGreen\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e (\u003c\/strong\u003e\u003c\/span\u003eoriginally Red\/Blue\u003cspan\u003e\u003cstrong\u003e)\u003c\/strong\u003e: CAN+ (For front mount usually the factory red CANbus wire)\u003cbr\u003e\u003cstrong\u003eBlue\u003c\/strong\u003e: 5V legacy output for input into JB4\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHarness types:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eUniversal harness\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ethis is a universal harness for use with JB4, BM3, MHD, EcuTek, etc. Installs in front or rear of car using included removable posi-taps.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePnP harness\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ethis harness is a plug and play option with the following requirements.\u003c\/li\u003e\n\u003col\u003e\n\u003cli\u003eIt is only compatible with the BMW GEN2 B58 and S58 platforms with automatic transmissions.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlex fuel kit must be mounted in the engine bay near the ECU, rear mounted flex fuel kits must use the universal harness\u003c\/li\u003e\n\u003cli\u003eNote BM3 is not compatible with the PnP harness and requires our universal harness!\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eLED:\u003cbr\u003e\u003c\/strong\u003eCurrent ethanol mixture will be shown with 01 indicating an error reading the sensor. The ending decimal will light up if the unit has CANbus access.\u003c\/p\u003e","brand":"BMS","offers":[{"title":"No Thank You","offer_id":44548002283619,"sku":null,"price":159.0,"currency_code":"USD","in_stock":true},{"title":"Yes add LFP Sensor Kit | +$60.00","offer_id":44548002316387,"sku":null,"price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/8781\/3987\/files\/CAN-Flex-LED-w-sensor_c3e91e66-45a3-4379-8e47-290252b2541c.webp?v=1788368018","url":"https:\/\/www.specialtyz.com\/products\/universal-bms-canflex-canbus-e85-analyzer-eca","provider":"Specialty-Z","version":"1.0","type":"link"}