This simple hardware kit provides you with everything you need to perform a basic fuel pump installation. After removing the stock fuel pump and its mount, apply the support foam to your new pump and insert it to the bore. The support foam will firmly hold the pump in place. Use a heat-gun or hair dryer to carefully warm the end collars of the PTFE hose and connect the fuel pump to the stock fuel filter inlet. The included fuel pump strainer will support the bottom of the fuel pump and prevent harmful debris from entering.
- Ideal for mild upgrades such as Walbro 255, Aeromotive 340, AEM 320, or other pumps with ~39mm case and 5/16" or 8mm hose barb.
- Not for use with Walbro 400 or 450 pumps which require external filters and heavy modification to the fuel pump housing.