Stainless Steel w/ w/b sensor support.	SZ 3" Test Pipes   Available only for TTs, these test pipes are available in both aluminized steel and stainless steel.   Also available with resonators.   Extra bungs for wideband sensors can be added for an additional cost.  Single bung would be placed on passenger side pipe.	SZ 3" TPs Aluminized Steel $360 + Shipping   SZ 3" TPs Stainless Steel $450 + Shipping   SZ 3" Resonated TPs Aluminized Steel $510 + Shipping   SZ 3" Resonated TPs Stainless Steel $600 + Shipping   W/B Sensor Add On 1X $30   W/B Sensor Add On 2X $60
Stainless Steel w/ resonators

 

Stainless Steel reduced back down to 2.5".	SZ 3" to 2.5" Test Pipes   Available only for TTs, these test pipes are available in both aluminized steel and stainless steel.   These pipes allow one to connect a 2.5" cat back to keep noise level down and not have to spend more money on a new cat back system.   Also available with resonators.   Extra bungs for wideband sensors can be added for an additional cost.  Single bung would be placed on passenger side pipe.	SZ 3" to 2.5" TPs Aluminized Steel $370 + Shipping   SZ 3" to 2.5" TPs Stainless Steel $460 + Shipping   SZ 3" to 2.5" Resonated TPs Aluminized Steel $520 + Shipping   SZ 3" to 2.5" Resonated TPs Stainless Steel $610 + Shipping   W/B Sensor Add On 1X $30   W/B Sensor Add On 2X $60
Close up of the reduced section.

 

Aluminized Steel   Stainless Steel   Resonated Aluminized Steel   CAT Aluminized Steel   CAT Stainless Steel

SZ TT 2.5" Test Pipes   Available only for TTs, these test pipes are available in both aluminized steel and stainless steel.   These pipes allow one to connect our 2.5" down pipes, stock pre cats, and other stock location pipes.   Also available with resonators and hi-flow catalytic converters (CAT).   Flex jointed test pipes are still available for those looking to keep unwanted pressure on the exhaust system.

SZ TT 2.5" TPs Aluminized Steel  $330 + Shipping   SZ TT 2.5" TPs Stainless Steel $420 + Shipping   SZ TT 2.5" Resonated TPs Aluminized Steel $480 + Shipping   SZ TT 2.5" Resonated TPs Stainless Steel $570 + Shipping   SZ TT 2.5" CAT TPs Aluminized Steel $575 + Shipping   SZ TT 2.5" CAT TPs Stainless Steel $660 + Shipping   SZ TT 2.5" Flex Joint TPs Aluminized Steel $480 + Shipping   SZ TT 2.5" Flex Joint TPs Stainless Steel $580 + Shipping

SZ NA 2.25" Test Pipes   Available only for NAs, these test pipes are available in both aluminized steel and stainless steel.   These pipes allow one to connect to the stock exhaust manifolds or aftermarket headers.   Also available with resonators and hi-flow catalytic converters (CAT).   We highly recommend 2.25" piping diameter to ensure a pleasant and quieter exhaust tone. If you wish to have 2.5" piping diameter please call us.

SZ NA 2.25" TPs Aluminized Steel $360 Shipped   SZ NA 2.25" TPs Stainless Steel $460 Shipped   SZ NA 2.25" Resonated TPs Aluminized Steel $530 Shipped   SZ NA 2.25" Resonated TPs Stainless Steel $630 Shipped   SZ NA 2.25" CAT TPs Aluminized Steel $575 Shipped   SZ NA 2.5" CAT TPs Stainless Steel $660 Shipped