Home Site Map Privacy Policy

 

Home
Up
Engine
Intake\Turbo
Fuel
Exhaust
TT Manifolds
Intercooler
RPS Clutches
The RPS Flywheel
UD & OD Pulley
Cooling
Suspension
Braking
Auto Trans & Flex Plate
Electronics
Innovate Widebands
Leader Gears
Hard Pipes & Moldings
300 Degree





Suspension

Subframe Spacers

 

Greg Dupree Subframe Spacers.  Set of 4 for $60 + shipping. They fit the Z and also the 240SX.
Subframe Spacers are available in black and red anodized aluminum.  Blue is no longer available.

Color

What the spacers do is pre-load the stock rubber bushings so the body does not float separately from the subframe. Stock, the body floats about an inch before the suspension does anything. Installing the Spacers will cause the Zs body to lean much less.
One of the reasons Zs wheel hop is because the sub frame is mounted loosely causing the subframe to bounce up and down.
Pre-loading the stock bushings results in much more responsive handling and also greatly reduces wheel hop. Also by retaining the stock rubber mounts you’re still isolating noise and vibration, versus replacing them with solid aluminum or delrin; which can be harsh.

 

   

Tension Rods

These are designed for longevity with uniquely incorporated teflon lined ball joints (zero maintenance).  Damage over time due to lack of lubrication to the ball joints requires replacement of the joint or the entire rod or arm. This design will save your investment.

$169+ Shipping

Front Upper Adjustable A-Arms

New Midori/TBO sty. Front upper A arms to adjust front camber. This design is guaranteed to hold the camber setting better than any other like product on the market as it does not allow sliding with its twist adjustable characteristic and locking perches. These are made by the same manufacturer that designed the Midori and TBO arms. We just eliminated the middle man to bring you this product at a great price. They are also specifically made for the Z32 as it has an extra offset so the securing perches do not get damaged by regular suspension travel. These allow for camber adjustment up to + or – 4 degrees.

$345 + Shipping

Rear Adjustable Arms

Adjustable rear arms

$219 + Shipping

Hicas Eliminator Kit

Shed weight off the rear of your Z and get rid of the Nissan 4-Wheel Steering.  Remember to check your tie rods for play.

Pricing is $169 + Shipping

 

 

Squish... 
Follow the directions included with your spacers.  The install is very easy and makes a huge difference.

Alignments
We encourage alignments ASAP after major suspension modifications, such as t-rods, a-arms, and shocks/springs/coilovers.